Library · Stock / inventory · How to run this
NutraScience disintegration fail is not Eagle Labs disintegration fail
Open one NutraScience bath cut. Put disintegration fails over batches. That is the fail %.
Pair: Disintegration-fail rate on Stock. Eagle Labs: disintegration-fail rate. Dissolution: dissolution-fail rate.
What you type
Disintegration fails — Batches that failed the NutraScience disintegration bath in the cut.
Batches — Batches tested on that same NutraScience bath cut.
Fail % = disintegration fails ÷ batches × 100. When fail % is fat, re-check binder / press dwell — never type a fake fail %.
What not to do
Skip inventing a fail %. Skip dumping an Eagle Labs CSV into the NutraScience fields. Skip treating dissolution fails as disintegration. Skip blending SKUs when one lot owns the skew.
Related: Stock, disintegration-fail rate, dissolution-fail rate, assay-fail rate.
Procedure
- Type disintegration fails and batches from the bath cut.
- Read fail %.
- Re-check binder / press dwell when fail % is material.
Failure modes
- Inventing fail %.
- Dumping Eagle Labs CSV into NutraScience fields.
- Treating dissolution fails as disintegration.
Worked example
None on this page yet. When one lands it will be a real case: what broke, the number, and what changed. Not a composite.
Glossary
- Disintegration-fail rate %
- Disintegration fails ÷ batches × 100.
Work with us — We run this job on your accounts. Services
FAQ
- Is this Eagle Labs disintegration-fail rate?
- Different co-man export. [Disintegration-fail rate](/manuals/eagle-labs-disintegration-fail-rate) reads Eagle Labs. Here you type NutraScience bath fails over batches.
- Is this NutraScience dissolution-fail rate?
- Related NutraScience grain. [Dissolution-fail rate](/manuals/nutrascience-dissolution-fail-rate) is dissolution. This page is disintegration-fail rate.
- What fail % should I invent?
- None. Pull disintegration fails and batches from the same NutraScience bath cut.