Library · Stock / inventory · How to run this
Eagle Labs plate fail is not NutraScience microbial fail
Divide plate fails by batches in one Eagle Labs micro cut. That ratio is EL plate-fail %.
Pair: Microbial fail rate on Stock. NutraScience twin: plate fail. Blend twin: blend-uniformity.
What you type
Microbial fails — Eagle Labs batches that failed the microbial / plate check in the cut.
Batches — Batches tested on that same Eagle Labs micro cut.
EL plate-fail % = microbial fails ÷ batches × 100. Fat EL plate-fail % usually means hygiene or raw contamination — chase that station; never invent an EL plate-fail chip.
What not to do
Skip inventing EL plate-fail %. Skip dumping a NutraScience or Vitaquest micro file into Eagle fields. Skip folding blend-uniformity fails into plate counts. Skip blending SKUs when one lot owns the hole.
Related: Stock, plate fail, blend-uniformity, assay-fail.
Procedure
- Type microbial fails and batches.
- Read EL plate-fail %.
- Chase hygiene / raw contamination when EL plate-fail % is material.
Failure modes
- Inventing EL plate-fail %.
- Dumping a NutraScience or Vitaquest micro file into Eagle fields.
- Folding blend-uniformity fails into plate counts.
Worked example
None on this page yet. When one lands it will be a real case: what broke, the number, and what changed. Not a composite.
Glossary
- EL plate-fail %
- Microbial fails ÷ Batches × 100.
Work with us — We run this job on your accounts. Services
FAQ
- Is this NutraScience microbial-fail rate?
- Different CMO plant book. [Microbial fail rate](/manuals/nutrascience-microbial-fail-rate) reads NutraScience plates. Here you only ratio Eagle Labs plate fails against Eagle batches.
- Is this Eagle Labs blend-uniformity fail rate?
- Sibling Eagle door on blend, not micro. [Blend-uniformity fail rate](/manuals/eagle-labs-blend-uniformity-fail-rate) is blend fails ÷ batches. This page is microbial plate fails ÷ batches.
- What EL plate-fail % should I invent?
- None. Pull microbial fails and batches from the same Eagle Labs micro cut.